Characteristics and Precautions of Stirring Reaction Bath at Low Temperature

June 22, 2022

The low temperature constant temperature stirring reaction bath is widely used in the experiments and appraisal work of medicine, scientific research, biology, chemical industry, etc. It can replace the dry ice and liquid nitrogen for low temperature reaction, can do viscosity test and other low temperature test in the bath, can be a high precision temperature The test provides a good constant temperature environment.
Use characteristics:

◆ High temperature control accuracy, easy operation, temperature setting and measurement temperature are digital display, clear and intuitive.

◆ Fully enclosed air-cooled imported compressor is highly efficient and reliable.

◆ stainless steel sink, beautiful and corrosion-resistant.

◆ The power is equipped properly, and the temperature is raised and lowered quickly.

◆ The whole volume is moderate, beautiful and generous.

Precautions:

1, the range of temperature and humidity.

2. It is strictly forbidden to carry the instrument or tilt the instrument after the liquid is injected into the liquid tank to prevent the working medium from intruding into the mechanism and causing danger or damage to the machine.

3. There should be enough space around the vent hole on the instrument and good dust resistance. Keep the instrument away from the heating equipment and avoid direct sunlight.

4、The instrument should not be used in places with serious flammability and environmental corrosion

Daily maintenance:

1 After use, turn off the equipment to be cooled first, then turn off (heat switch, circulation pump switch, agitation switch), refrigerator switch, and power switch. Finally, pull down the safety switch and unplug the power plug.

2 If you do not use it for a long time, remove the coolant and rinse it with clean water.

The above is the Characteristics and Precautions of Stirring Reaction Bath at Low Temperature we have listed for you. You can submit the following form to obtain more industry information we provide for you.

You can visit our website or contact us, and we will provide the latest consultation and solutions

Share to:

Send Inquiry

Previou:Multiphase reaction engineering: laying the foundation for industrial upgrading

Next:Research on the application of new thin-wall H-shaped steel and wall materials in steel structure buildings