Industry Information

Update December 25, 2023

Working principle of casing heat pipe heat exchanger

The casing type heat pipe heat exchanger structure is a concentric phase sleeve of two unequal diameter pipes, which is also called a radial heat pipe because its heat transfer direction is radial....

Update November 21, 2023

Heat Exchanger

A heat exchanger (English translation: heat exchanger) is a device that transfers part of the heat of a hot fluid to a cold fluid, also known as a heat exchanger. Heat exchangers are common equipment...

Update October 11, 2023

Heat treatment

Heat treatment is a kind of metal thermal processing technology that controls the performance of a metal material by heating, keeping warm, and cooling it in a certain medium by changing the...

Update September 22, 2023

Reboiler Basics

Reboiler Basics Reboiler (Reboiler) is a distillation tower bottom or side line of the heat exchanger, used to vaporize a portion of the liquid-phase product back to the tower for gas-phase reflux,...

Update August 24, 2023

Methanol synthesis reactor maintenance overhaul

1、General 1.1 Scope of application This procedure applies to the overhaul and maintenance of methanol synthesis reactor R2001. 1.2 Equipment overview Methanol synthesis reactor R2001 belongs to...

Update August 03, 2023

Why does a pressure tank extend the life of a pump?

The inside of a pressure tank is divided into two parts by a diaphragm made of rubber. One side is connected to a pipe and is called the water storage chamber. The other side has air and is called...

Update July 15, 2023

Points to pay attention to in the design and manufacturing of low-temperature pressure vessels

Abstract: The liquefaction of gases in industrial installations, as well as the production, storage, and application of liquefied gases, are becoming increasingly widespread. The development of...

Update June 15, 2023

Thermal insulation engineering

1、 Basic knowledge of insulation Insulation is a general term for insulation and cold insulation. Insulation engineering is to ensure the optimal temperature range for normal production and minimize...

Update June 01, 2023

Hydraulic test of ball tank

How to carry out the hydraulic test of the ball tank? After the completion of the installation of the ball tank, the pressure test and gas tightness test should be carried out according to the...

Update May 15, 2023

The main manufacturing processes for pressure vessels

Manufacturing process The manufacturing process of pressure vessels includes preparation of raw materials, scribing, undercutting, bending, forming, edge processing, assembly, welding, inspection,...