Why does a pressure tank extend the life of a pump?
August 03, 2023
The inside of a pressure tank is divided into two parts by a diaphragm made of rubber. One side is connected to a pipe and is called the water storage chamber. The other side has air and is called the air storage chamber.
The air stored in the air storage room assumes the role of regulating the internal air pressure, through the use of air can be compressed this characteristic, through the air pressure generated by the compression of the intermediate diaphragm, so that the diaphragm reverse extrusion of the water chamber, to achieve the role of pressurization and drainage.
Let the pump constantly to the tank water storage, the internal air is squeezed, the amount of water storage increases, the air pressure inside the tank also gradually increased, when increased to the pump set the stop pressure, the pump stops working.
At this time the faucet is opened, gradually discharging the water stored in the tank, the air pressure inside the tank is gradually reduced, when reduced to the pump set up after the start pressure, the pump restarted work, to the tank water storage, and so on.
Therefore, the pressure tank can make the pump start only when it needs to work, effectively reducing the number of pump starts and stops, extending the service life of the pump. Frequent and repetitive startups can put pressure on the startup and run capacitors.
Frequent and repetitive starting creates electrical and mechanical stress on the well pump motor as it goes from a dead stop to full speed in an instant. Think of a light bulb turning on and off repeatedly - it puts stress on the filament, which can shorten the life of the bulb.
The above is the Why does a pressure tank extend the life of a pump? we have listed for you. You can submit the following form to obtain more industry information we provide for you.
You can visit our website or contact us, and we will provide the latest consultation and solutions
August 03, 2023
