How to install and use the reaction kettle

July 02, 2022

How to install and use the Reactor 1. It should be installed on a firm and level workbench. The height of the workbench is determined according to the use conditions. There should be a certain space (≥360cm) around the equipment and the workbench for installation and post-maintenance.

2. The installation shaft is required to be perpendicular to the ground level, and the non-perpendicularity (inclination) should not be greater than 1/1000 of the total height of the equipment.

3. Self-supplied spare parts and safety valves on each process of the equipment itself must be equipped according to the requirements of the reactor.

4. After installation, check whether the connecting parts and transmission parts are firm and reliable. The connection pipes, nozzles, seals and the whole machine should be tested for airtightness, and there should be no bubble, dripping, dripping or leakage.

5. Before starting the machine, inject the 46# mechanical oil into the reducer, open the motor cover and turn the fan blade by hand to check whether there is any jamming phenomenon. If there is any scraping of the stirring paddle, clean the dirt in the kettle before starting the machine. The empty car runs for 30 minutes without any abnormal noise or vibration before it can be officially put into production. The gear oil is periodically replaced depending on the production.

The above is the How to install and use the reaction kettle we have listed for you. You can submit the following form to obtain more industry information we provide for you.

You can visit our website or contact us, and we will provide the latest consultation and solutions

Share to:

Send Inquiry

Previou:Laboratory reaction kettle daily care operation precautions

Next:Plastic heat exchanger can be applied sewage source heat pump energy-saving system