Page-2 All Products - Heat Exchangers,Reaction Stills,Storage Tanks,Column Category,Steel Structure Equipment,Environmental Products

Heat Exchange Tube Condenser

Brand: Yangzhou Tongyang Chemical Equipment Co., Ltd.

Packaging: asked by buyer

Supply Ability: 15-90 days

Min. Order: 1 Set/Sets

place of origin: China

Heat exchange tube condensers can be divided into the following categories: 1. Direct condenser: The cooling medium flows directly through the pipe wall, transferring heat to the cooling medium, causing it to cool and condense. 2. Indirect condenser: Inside the heat exchange tube, heat is transferred to the cooling...

Contact Now

Shell Tube Vertical Condenser

Brand: Yangzhou Tongyang

Packaging: naked

Supply Ability: Diameter ≤ 4M

Min. Order: 1 Set/Sets

place of origin: China

Stainless steel vertical condenser upright installation, only used in medium and large ammonia refrigeration plant. Compared with horizontal shell-and-tube condenser, shell tube vertical condenser is not only an upright device, but also has no end cover at both ends, and the flow mode of water and refrigerant is...

Contact Now

Stainless Steel Horizontal Evaporative Condenser

Brand: Yangzhou Tongyang Chemical Equipment Co., Ltd.

Packaging: asked by buyer

Supply Ability: 15-90 days

Min. Order: 1 Set/Sets

place of origin: China

The working principle of the condenser is that the gas passes through a long tube (usually coiled into a solenoid) to let the heat escape to the surrounding air. Metals such as copper have strong thermal conductivity and are often used to transport steam. In order to improve the efficiency of the condenser, heat sinks...

Contact Now

Low Temperature Steam Condenser

Brand: Yangzhou Tongyang Chemical Equipment Co., Ltd.

Packaging: asked by buyer

Supply Ability: 15-90 days

Min. Order: 1 Set/Sets

place of origin: China

The steam condenser can be condensed in the surface steam condenser in two ways. First, the cooling water passes through a series of pipes, and the steam passes through the pipes. Secondly, steam flows through a series of pipes, and water flows outside the pipes in the form of film. The surface condenser is mainly...

Contact Now

Liquid Separation Rectifying Tower

Supply Ability: 15-90 days

Min. Order: 1 Set/Sets

Condition: New

Continuous rectifying tower can be divided into the following categories: 1. Rectifying tower Mainly used to separate liquid components from mixtures. Its structure usually consists of tower body, packing, inlet, outlet, condenser, etc. In the tower, the filler plays a role in increasing surface area and contact time,...

Contact Now

Stainless Steel Split Cylinder

Brand: Yangzhou Tongyang Chemical Equipment Co., Ltd.

Packaging: asked by buyer

Supply Ability: 15-90 days

Min. Order: 1 Set/Sets

place of origin: China

The split cylinder is the main supporting equipment of the boiler. It is used to distribute the steam generated by the boiler to various pipelines. split cylinder is a pressure-bearing equipment and belongs to a pressure vessel. Its pressure-bearing capacity and capacity should correspond to the supporting boiler. ....

Contact Now

Stainless Steel Rectifying Tower

Brand: Yangzhou Tongyang Chemical Equipment Co., Ltd.

Packaging: asked by buyer

Supply Ability: 15-90 days

Min. Order: 1 Set/Sets

Condition: New

Plate rectifying tower is a device used for separating liquid mixtures, which increases contact area and mixture separation efficiency by setting multiple horizontal plates inside. Plate rectifying tower can be classified according to different classification standards, and the following are several common...

Contact Now

Energy Efficient Rectifying Tower

Brand: Yangzhou Tongyang Chemical Equipment Co., Ltd.

Packaging: asked by buyer

Supply Ability: 15-90 days

Min. Order: 1 Set/Sets

place of origin: China

Rectifying tower characteristics: 1. Fine processing: rectifying is a fine processing technology that can separate different components from a mixture to obtain pure substances. 2. Efficient and energy-saving: During the rectifying process, the mixture is separated into different components through heating and cooling...

Contact Now

High Temperature Rectifying Tower

Brand: Yangzhou Tongyang Chemical Equipment Co., Ltd.

Packaging: asked by buyer

Supply Ability: 15-90 days

Min. Order: 1 Set/Sets

place of origin: China

The chemical plant production rectifying tower is a device used to separate various components in a mixture. It achieves separation by heating the mixture to its boiling point, condensing the vapor into a liquid, and then evaporating the liquid to its boiling point, continuously cycling this process. An...

Contact Now

High Efficiency Rectifying Tower

Brand: Yangzhou Tongyang Chemical Equipment Co., Ltd.

Packaging: asked by buyer

Supply Ability: 15-90 days

Min. Order: 1 Set/Sets

place of origin: China

Characteristics of rectifying in Chemical Plants: 1. Fine processing: rectifying is a fine processing technology that can separate different components from a mixture to obtain pure substances. 2. Efficient and energy-saving: During the rectifying process, the mixture is separated into different components through...

Contact Now

Drum Type Crystallization Heating Slicer

Brand: Yangzhou Tongyang Chemical Equipment Co., Ltd.

Packaging: asked by buyer

Supply Ability: 15-90 days

Min. Order: 1 Set/Sets

place of origin: China

Chemical Slicing Machine There are two ways to fabricate, divided into upper fabric and post-feeding. According to the characteristics of chemical materials, there are single drum type and double drum type. The material tank insulation includes steam insulation, heat conduction oil circulation insulation, and electric...

Contact Now

Chemical Tower Metal Packing Grid

Brand: Yangzhou Tongyang Chemical Equipment Co., Ltd.

Packaging: asked by buyer

Supply Ability: 15-90 days

Min. Order: 1 Set/Sets

place of origin: China

Metal structured packing is a common packing material. It has the following purposes and characteristics: 1. Filler material: Metal structural fillers are generally made of stainless steel wire or galvanized steel wire, which has excellent corrosion resistance and can be used for a long time in harsh environments. 2....

Contact Now

Metal Packing Grille With Reinforcement

Brand: Yangzhou Tongyang Chemical Equipment Co., Ltd.

Packaging: asked by buyer

Supply Ability: 15-90 days

Min. Order: 1 Set/Sets

place of origin: China

The function of metal structured packing is to provide sufficient contact surfaces for the gas and liquid phases, and to create conditions for improving their turbulence (mainly the gas phase), in order to facilitate mass transfer (including heat transfer). They should be able to make the gas and liquid contact...

Contact Now

Stainless Steel Metal Packing Grille

Brand: Yangzhou Tongyang Chemical Equipment Co., Ltd.

Packaging: asked by buyer

Supply Ability: 15-90 days

Min. Order: 1 Set/Sets

place of origin: China

Metal structured packing are mainly used in the following fields: 1. Petrochemical industry: Metal structured packing can be used for separation, adsorption, desulfurization, denitrification and other processes in petrochemical plants, such as petroleum distillation towers, adsorption towers, desulfurization towers,...

Contact Now

Metal Structured Wire Mesh Corrugated Packing

Brand: Yangzhou Tongyang Chemical Equipment Co., Ltd.

Packaging: asked by buyer

Supply Ability: 15-90 days

Min. Order: 1 Set/Sets

place of origin: China

350 Y structured packing is made of orifice plate with grooves on the surface, Maintain the characteristics of Wire Mesh Structural Packing , enhances the uniform distribution of liquid and packing wetting performance, and improves mass transfer efficiency. Applicable occasions: Metal orifice plate packing has the...

Contact Now

350 Y Structured Packing

Brand: Yangzhou Tongyang Chemical Equipment Co., Ltd.

Packaging: asked by buyer

Supply Ability: 15-90 days

Min. Order: 1 Set/Sets

place of origin: China

350 Y structured packing is made of orifice plate with grooves on the surface, Maintain the characteristics of Wire Mesh Structural Packing , enhances the uniform distribution of liquid and packing wetting performance, and improves mass transfer efficiency. Applicable occasions: Metal orifice plate packing has the...

Contact Now

Jacketed High Pressure Multifunctional Reactor

Brand: Yangzhou Tongyang Chemical Equipment Co., Ltd.

Packaging: asked by buyer

Supply Ability: 15-90 days

Min. Order: 1 Set/Sets

place of origin: China

The reactor is broadly understood as a stainless steel vessel with physical or chemical reactions. The structural design and parameter configuration of the vessel are based on different process condition requirements, and the design conditions, process, inspection and manufacturing, and acceptance need to be based on...

Contact Now

Square Float Valve Tray

Brand: Yangzhou Tongyang Chemical Equipment Co., Ltd.

Packaging: asked by buyer

Supply Ability: 15-90 days

Min. Order: 1 Set/Sets

place of origin: China

Stainless Steel Float Valves The float valve is a gas phase dispersion component on the float valve tray. It can float on the tray and change its opening with the change of gas flow. The float valve is fixed to the required height on the vessel wall and connected to the supply line. When the liquid level rises, the...

Contact Now

Evaporative Spiral Heat Exchanger

Brand: Yangzhou Tongyang Chemical Equipment Co., Ltd.

Packaging: asked by buyer

Supply Ability: 15-90 days

Min. Order: 1 Set/Sets

Condition: New

Energy-saving spiral plate heat exchanger is an efficient heat exchange equipment mainly used for heat transfer and energy conservation. It adopts a spiral plate structure, which forms vortex flow in the pipe, thereby increasing the heat transfer area and heat transfer between the fluids. The main characteristics of...

Contact Now

Non Detachable Spiral Plate Heat Exchanger

Brand: Yangzhou Tongyang Chemical Equipment Co., Ltd.

Packaging: asked by buyer

Supply Ability: 15-90 days

Min. Order: 1 Set/Sets

Condition: New

Energy-saving spiral plate heat exchanger is an efficient heat exchange equipment mainly used for heat transfer and energy conservation. It adopts a spiral plate structure, which forms vortex flow in the pipe, thereby increasing the heat transfer area and heat transfer between the fluids. The main characteristics of...

Contact Now

Stainless Steel Spiral Heat Exchanger

Brand: Yangzhou Tongyang Chemical Equipment Co., Ltd.

Packaging: asked by buyer

Supply Ability: 15-90 days

Min. Order: 1 Set/Sets

Condition: New

Corrosion resistant spiral heat exchangers are mainly used for heat exchange of high-temperature, high-pressure, and highly corrosive media in industries such as chemical, petroleum, pharmaceutical, food, and light industry. Its main uses include: 1. Used for cooling, heating, evaporation, drying and other processes...

Contact Now

Stainless Steel Spiral Plate Heat Exchanger

Brand: Yangzhou Tongyang Chemical Equipment Co., Ltd.

Packaging: asked by buyer

Supply Ability: 15-90 days

Min. Order: 1 Set/Sets

place of origin: China

Spiral plate heat exchangers are divided into detachable spiral plate heat exchangers and inseparable spiral plate heat exchangers. The structure of the non-detachable spiral plate heat exchanger is relatively simple, and both ends of the spiral channel are welded. Detachable spiral plate heat exchanger. Except for...

Contact Now

Stainless Steel Sieve Tray

Packaging: well packaged

Supply Ability: depends on quantities

Min. Order: 1 Piece/Pieces

place of origin: China

nominal diameter 80: Nominal Diameter 150

Stainless float valve tray: The float valve tray is provided with a plurality of round holes on the tray plate, and each hole is welded with a short tube called a riser tube, and the tube is covered with a "hat" called a blister, and a plurality of strips are formed around the blister. Hole, during operation, the...

Contact Now

Metal Float Valve Tray

Brand: Yangzhou Tongyang Chemical Equipment Co., Ltd.

Packaging: well packaged

Supply Ability: depends on quantities

Min. Order: 1 Piece/Pieces

Model No.: 2021092

Distillation Metal Sieve Tray It has the advantages of both bubble cover tray and sieve plate and is the most widely used tray. Features: large production capacity, large flexibility of operation, tray efficiency High, the gas pressure drop and liquid level drop small, low cost. Expert tips: float valve tray should...

Contact Now