Industry Information

Update July 21, 2022

The difference between cross-flow cooling tower and counter-flow cooling tower

Briefly introduce the difference between cross-flow and counter-current towers. Cooling towers are devices that use water as a circulating coolant to absorb heat from a system and discharge it into...

Update July 20, 2022

Introduction of evaporation calculation of horizontal centrifugal thin film evaporator

The horizontal centrifugal thin film evaporator has the characteristics of low evaporation temperature, strong evaporation capacity, high evaporation efficiency and stepless speed regulation. This...

Update July 19, 2022

Structural characteristics and working principle of high-efficiency alcohol recovery tower

High-efficiency alcohol recovery tower structure and main features: The high-efficiency alcohol recovery tower system consists of a heater, an evaporator, a packed column, a condenser, a...

Update July 18, 2022

Overview of Evaporation in Ethylene Production in Evaporation Equipment

Evaporation equipment Evaporation in the production of traditional Chinese medicine refers to the process in which some of the solvent in the liquid medicine is separated from the non-volatile...

Update July 16, 2022

Alcohol recovery tower operation 9 major steps

The alcohol recovery tower consists of six parts: tower kettle, tower body, condenser, cooler, buffer tank and high-level storage tank. It is suitable for the recovery of dilute alcohol in...

Update July 15, 2022

Alcohol recovery tower steps

After alcohol is used as a solvent for osmosis and reflux concentration, its concentration is inevitably greatly reduced, and it contains a large amount of dregs and other impurities. In order to...

Update July 14, 2022

Plate heat exchanger application range

Plate heat exchangers have been widely used in metallurgy, mining, petroleum, chemical, electric power, medicine, food, chemical fiber, paper, textile, ship, heating and other departments, can be...

Update July 13, 2022

Centrifugal separation technology for tubular separator

The centrifugal separation technology of the tubular separator is a technique for separating substances according to the centrifugal force generated by the rotation of the centrifuge and the factors...

Update July 11, 2022

Introduction to high-efficiency crystallizer technology

The crystallizer copper plate is made of Cu-Cr-Zr. The requirements of high-efficiency continuous casting mold are good thermal conductivity, high recrystallization temperature, high thermal fatigue...

Update July 09, 2022

Stainless steel structure, material control and new steel type technology

SUS304 has excellent balance characteristics such as excellent corrosion resistance, heat resistance and workability, and the equilibrium state of FeCr8% Ni alloy corresponding to SUS3o4. By the name...